Details parameters

<p style="margin-left:0px;">Wings has only one layer so printer have to be good calibrated.</p><p style="margin-left:0px;">First layer have to be perfect for good flight.</p><p style="margin-left:0px;">I use PLA but you can experiment with other filaments</p><p style="margin-left:0px;">PEI sheet ensure best quality because after print and cool down the whole dragon body can be remove without bends</p><p style="margin-left:0px;">If you have other types of sheets and adhesion is very large, remove dragon body carefully because if you bend it to much the flights might be not too good.</p><p style="margin-left:0px;">&nbsp;</p><p style="margin-left:0px;">Body printing:</p><ul style="list-style-type:disc;"><li>0,2 mm layer,</li><li>Use organic, tree support because legs need it. Be gentle with removing support, because foot of the leg can break off.</li><li>You can change color by use color change option in slicer. You can do it on second layer</li></ul><p style="margin-left:0px;">Head printing</p><ul style="list-style-type:disc;"><li>0,2 mm layer</li><li>100 % infill for good balance. It's weight should be around 3 grams. It may be little difference due to various density of PLA filament</li><li>Print with position as it is. Tilted 45 degree</li><li>Raft 3 layers</li><li>Support on bed only, grid style ( no tree, organic)</li></ul><p style="margin-left:0px;"><strong>Instruction</strong></p><p style="margin-left:0px;">Once printed, press the head onto the body. It should fit tight without glue.</p><p style="margin-left:0px;">Bend up the tail a little and throw dragon like dart or paper plane.</p><figure class="image image_resized" style="height:auto;width:426.325px;"><img style="aspect-ratio:800/600;" src="https://media.printables.com/media/prints/625290/rich_content/7db060b4-efac-4518-9dc7-c9a47ff48fdd/thumbs/cover/800x600/jpg/img_20231025_184027.webp?x-oss-process=image/format,webp" width="800" height="600"></figure><p><br>&nbsp;</p>