KYZ HSW Bowls - 8 Sizes
519
6
KYZ_Design
@KYZ_Design
| Designs: | 4 |
| Downloads: | 1726 |
| Followers: | 1 |
| About me: | Product development engineer by day, product development engineer by night. Maybe one day - I can flip that around! (You can also find me on Makerworld here: https://makerworld.com/en/@KYZDesign) |
Product description
Introduction
I designed these as I've had a few requests for bowls after I released the “HSW round shelves” model. You don't need a HSW (Honeycomb Storage Wall) to use them as they have flat bottoms.
The size denoted is the widest part inside the bowl. You can visualise it on your wall by importing a wall piece and the bowls in the slicer and arranging them in there, this will help you select the right bowl sizes. You can also use the measure tool within the slicer.
If you can't put holes in your wall to mount a HSW, check out some free-standing variants in this collection on Printables or this collection on Makerworld.
Support
If you would like to say thanks, please post a make (with it fully loaded!) and share here and on socials. You could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection on Printables or this collection on Makerworld.
The little dragons in the picture are by Zou3D and the big dragons are by Cinderwing - they are both amazing - check them out!
Thank you and enjoy.
Printing settings
Print settings
- 3 perimeters
- There should be enough bottom layers to ensure that the bottom of the bowl is completely solid. Just set the bottom layers to 10. (Note that the bigger bowls have thicker bottoms)
- Paint your seams so they are less visible (look at the white dots in the sliced preview)
- I suggest slowing down the outer walls to ensure the part comes out strong with consistent gloss level all around (but this is optional)
Material
- Suggest PLA, ASA, ABS, PETG-CF or similar stiffness materials.
- If you use PETG, the clip will be a little too easy to remove and
- If you use a stiff material like ASA-CF or ABS-GF, the clip will be difficult to insert/remove.
License
❌ Sharing without ATTRIBUTION
✔️ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike
https://creativecommons.org/licenses/by-nc-sa/4.0/
All files (9)
Details parameters
<h3>Print settings</h3><ul style="list-style-type:disc;"><li>3 perimeters</li><li>There should be enough bottom layers to ensure that the bottom of the bowl is completely solid. Just set the bottom layers to 10. (Note that the bigger bowls have thicker bottoms)</li><li>Paint your seams so they are less visible (look at the white dots in the sliced preview)</li><li>I suggest slowing down the outer walls to ensure the part comes out strong with consistent gloss level all around (but this is optional)</li></ul><h3 style="margin-left:0px;">Material</h3><ul style="list-style-type:disc;"><li>Suggest PLA, ASA, ABS, PETG-CF or similar stiffness materials.</li><li>If you use PETG, the clip will be a little too easy to remove and</li><li>If you use a stiff material like ASA-CF or ABS-GF, the clip will be difficult to insert/remove.</li></ul>
Other information
| Created on | July 1, 2024, 11:25 a.m. |
|---|---|
| Last edition | Nov. 21, 2024, 7:44 a.m. |
| Added by | @KYZ_Design |
| Category | Hobby & Workshop |
| License dates | Yes |
| Product status | Active |
| Downloads | 519 |
|---|---|
| Rating | 0.0 |
| Number of likes | 6 |
Customer reviews
0.0 out of 56 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!
