The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.

• Thanks to the worm gear, it can never happen that the stand with your mobile falls flat.
• Thanks to the combination of a worm gear with bevel gears, the stand enables easy and smooth tilting.
• Compatible with charger.
• It is not necessary to glue the parts here. (Otherwise I made a profile where there are parts with clearance. This version requires the use of glue)
• Smooth design
• Different colors can be used for mechanical parts (Profile: Divided into two plates - Different color).

Assembly instruction:

Instructions can be found in the video below. Please follow the procedure: (video)

https://www.youtube.com/shorts/9PywQ-fwkmk

Groove clearance problem:

If there is too big clearance in the guide groove (02_Gear and 03_Base), it may happen that the 02_Gear tilts too much and the 01_Worm gear will not engage (the stand will not tilt). If this situation occurs, I recommend slightly pushing the left side of the 02_Gear and turning with the 06_Adjustable_Gear.

A VERSION WITH CLEARANCE

• It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)
• Parts with the letter C in their name are parts that have increased clearance. These parts must be glued