Cascade card wallet V2 (Print-in-place)

(0.0 from 0 reviews)

51

1

Hugo
@Hugo

Designs:15
Downloads:742
Followers:2

Product description

The version 2 of my card Wallet, I re-designed every component to make it easier to print and more reliable.

 

Update : I added the money clip

There is now a version with and without money clip in the back.

 

This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.

Filaments used in the pictures : Link

  • FormFutura Refill PETG Light Grey
  • FormFutura Refill PETG Iron Grey

Here are the key updates:

  1. The new version can accommodate 6 cards, compared to 5 in the previous iteration.
  2. The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.
  3. The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.

This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.

I have not yet designed a money clip for the back, but it will be included in a future update.

Printing settings

  • Nozzle size : 0.4 mm
  • Layer height : 0.2 mm
  • PLA and PETG both work
  • No support needed
  • The STL is already oriented, the model is printed upright

Freeing the mechanism :

Force on the slider to crack it open :

If it is not enough, you can push the pivot on the back :

Enjoy :)

License

❌ Sharing without ATTRIBUTION
✔️ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition

This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike
https://creativecommons.org/licenses/by-nc-sa/4.0/

All files (2)

Cascade_card_wallet_V2.stl (628.7 KB)

Cascade_Card_wallet_V2_with_money_clip.stl (716.1 KB)

Details parameters

<ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3><strong>Freeing the mechanism :</strong></h3><p>Force on the slider to crack it open :</p><figure class="image image_resized" style="width:357px;"><img style="aspect-ratio:800/1067;" src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/thumbs/cover/800x1067/jpg/20240310_165015.webp" width="800" height="1067"></figure><p>If it is not enough, you can push the pivot on the back :</p><figure class="image image_resized" style="width:357px;"><img style="aspect-ratio:800/1067;" src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/thumbs/cover/800x1067/jpg/20240310_165005.webp" width="800" height="1067"></figure><p>Enjoy :)</p>

Other information

Created onJune 1, 2024, 11:42 a.m.
Last editionJune 18, 2024, 5 p.m.
Added by@Hugo
CategoryGadgets
License datesYes
Product statusActive
Downloads51
Rating0.0
Number of likes1

Customer reviews

0.0 out of 51 global ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers.

Reviews (0)

...