Screwgate Carabiner (Print-in-place)
667
8
Product description
I was looking for a screwgate print-in-place carabiner and didn't find it, so I made it
⚠ This model requires a very accurate printer and good bed adhesion
I made this fun print in place model to hook things. I added a sping back action to feel like a real carabiner.
After printing, I recommend unlocking the screw first, and then forcing the gate open gently should free the parts.
Printing settings
Layer height : 0.2mm
First layer : if you don't have perfect first layer adhesion, I would recommend using a raft
Print orientation : the STL is already oriented
Print time : around 1h on my prusa mk3s
Bonus (optional) :
I added an optional piece to glue on if you want to complete the screw part.
Note that the little hole should be facing up the carabiner in order for the thread to be perfectly aligned (as shown below).
I guess it is not technicaly print in place if you add this piece but nevermind
And obviously this is not for climbing 😅
License
❌ Sharing without ATTRIBUTION
✔️ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution-NonCommercial
https://creativecommons.org/licenses/by-nc/4.0/
All files (2)
Details parameters
<p>Layer height : 0.2mm</p><p>First layer : if you don't have perfect first layer adhesion, I would recommend using a raft</p><p>Print orientation : the STL is already oriented </p><p>Print time : around 1h on my prusa mk3s</p><p> </p><h4><strong>Bonus (optional) :</strong></h4><p>I added an optional piece to glue on if you want to complete the screw part.</p><p>Note that the little hole should be facing up the carabiner in order for the thread to be perfectly aligned (as shown below).</p><figure class="image image_resized" style="width:490.15px;"><img style="aspect-ratio:800/387;" src="https://media.printables.com/media/prints/565999/rich_content/31906775-1774-4c4e-926d-b2a8149cf99b/thumbs/cover/800x387/png/image.webp" width="800" height="387"></figure><p>I guess it is not technicaly print in place if you add this piece but nevermind</p><p> </p><p>And obviously this is not for climbing 😅</p>
Other information
| Created on | June 1, 2024, 10:51 a.m. |
|---|---|
| Last edition | April 18, 2026, 9:46 a.m. |
| Added by | @Hugo |
| Category | Hobby & Workshop |
| License dates | Yes |
| Product status | Active |
| Downloads | 667 |
|---|---|
| Rating | 0.0 |
| Number of likes | 8 |
Customer reviews
0.0 out of 58 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!
