Toy Butterfly Knife (No Hardware Needed)
15
0
15
0
Marc3DP
@Marc3DPDesigns: | 370 |
Downloads: | 27043 |
Followers: | 0 |
About me: | My name is Martin, better known as Marc3DP. I'm a huge 3d printing enthusiast and a co-creator of 3D PrintShelf . I have also a Youtube channel about 3D printing models https://www.youtube.com/c/Marc3DP |
Product description
Toy Butterfly Knife (No Hardware Needed) by OwenTF
This is a toy Butterfly Knife / Balisong I designed. No metal hardware such as screws or bolts are needed.
You can find my other toy knife designs here.
You can obtain a commercial license to sell prints of this here. Commercial seller tier club members have permission use this model for commercial purposes during active membership.
Printing settings
Instructions
- I recommend printing with 3 wall layers and 100% infill.
- This is designed with very tight tolerances so print quality is very important.
- If you have problems with the screw tolerances you can try shrinking them in the x and y directions.
Assembly
The first step for assembly is to separate the handles and blade from their bases. Firmly grip the base and snap it off. Next, use small pliers to remove the supports from the pin holes at the top of the handles and bottom of the blade. File down any material left in the pin holes from the supports. I recommend using a small circular file but a knife would also work.
The blade pins should have a very loose fit with the blade and a tight fit with the handles. Also check the fit between the blade and the handles. If it is too tight and does not rotate smoothly, file down the inside surfaces of the handles until it rotates smoothly. Once everything fits together smoothly, use a flat head screwdriver to screw the pins in place. I would also recommend applying a plastic lubricant on all contact surfaces.
Image of all the parts before supports are removed.
This video shows what each part should look after the supports have been removed. It also shows how to assemble them.
This is an image of how it should look after being assembled.
This is a re-upload of the model made by OwenTF ➡ https://www.printables.com/model/764438-toy-butterfly-knife-no-hardware-needed . I have the creator's consent to use the photos and description.
License
❌ Sharing without ATTRIBUTION
✔️ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike
https://creativecommons.org/licenses/by-nc-sa/4.0/
Details parameters
<h3><strong>Instructions</strong></h3><ul><li>I recommend printing with 3 wall layers and 100% infill.</li><li>This is designed with very tight tolerances so print quality is very important.</li><li>If you have problems with the screw tolerances you can try shrinking them in the x and y directions.</li></ul><p><strong>Assembly</strong></p><p>The first step for assembly is to separate the handles and blade from their bases. Firmly grip the base and snap it off. Next, use small pliers to remove the supports from the pin holes at the top of the handles and bottom of the blade. File down any material left in the pin holes from the supports. I recommend using a small circular file but a knife would also work.<br>The blade pins should have a very loose fit with the blade and a tight fit with the handles. Also check the fit between the blade and the handles. If it is too tight and does not rotate smoothly, file down the inside surfaces of the handles until it rotates smoothly. Once everything fits together smoothly, use a flat head screwdriver to screw the pins in place. I would also recommend applying a plastic lubricant on all contact surfaces.</p><p> </p><p><strong>Image of all the parts before supports are removed.</strong></p><figure class="image"><img style="aspect-ratio:800/600;" src="https://media.printables.com/media/prints/764438/rich_content/75ef3302-2ec4-40db-8876-acf0b4fd5147/thumbs/cover/800x600/jpg/13732c2c-6e5d-499d-89f1-891f0a2b517d.webp" width="800" height="600"></figure><p> </p><p><strong>This video shows what each part should look after the supports have been removed. It also shows how to assemble them.</strong></p><figure class="media"><div data-oembed-url="https://youtu.be/wXwBjPturD0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wXwBjPturD0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p> </p><p><strong>This is an image of how it should look after being assembled.</strong></p><figure class="image"><img style="aspect-ratio:800/600;" src="https://media.printables.com/media/prints/764438/rich_content/2729cf66-50d8-45e5-b96a-ef529d4474fa/thumbs/cover/800x600/jpg/ecd0d20a-0eb4-4b44-a9a5-f1dfc9661e04.webp" width="800" height="600"></figure><p> </p><p>This is a re-upload of the model made by <a href="https://www.printables.com/@OwenTF_1791221"><strong>OwenTF</strong></a><strong> </strong> ➡ <a href="https://www.printables.com/model/764438-toy-butterfly-knife-no-hardware-needed">https://www.printables.com/model/764438-toy-butterfly-knife-no-hardware-needed</a> . I have the creator's consent to use the photos and description.</p>
Other information
Created on | May 7, 2024, 9:48 a.m. |
---|---|
Last edition | May 18, 2024, 4:59 a.m. |
Added by | @Marc3DP |
Category | Toys & Games |
License dates | Yes |
Product status | Active |
Downloads | 15 |
---|---|
Rating | 0.0 |
Number of likes | 0 |
Customer reviews
0.0 out of 50 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!