(A)cornhole
3
0
3
0
Marc3DP
@Marc3DPDesigns: | 370 |
Downloads: | 26997 |
Followers: | 0 |
About me: | My name is Martin, better known as Marc3DP. I'm a huge 3d printing enthusiast and a co-creator of 3D PrintShelf . I have also a Youtube channel about 3D printing models https://www.youtube.com/c/Marc3DP |
Product description
(A)cornhole by 3DPmom
Need something to pass the time while your turkey's cooking this Thanksgiving? I gotcha covered with this game of (A)cornhole.
The goal is to launch your acorns through the hole. The rest of the rules/point system are up to you:)
Included are 5 files: (1) Tree Trunk; (2) Tree stand; (3) Acorn launcher; (4) Acorn top & (5) Acorn bottom.
Printing settings
Layer Height 0.2mm
15-20% infill
PLA works great
No supports needed but you may need a brim on the tree trunk and acorn launcher (I used a brim for both).
Some assembly required: you will need to superglue the acorn tops to the acorn bottoms. (Print several acorns for launching). Print two of the tree stands. When they're done printing connect them to the tree trunk to make it stand
.
Dimensions:
Tree trunk: 8.25in. x 5.75in. x ⅜ in.
Tree Stand: 2.5in. x 1in. x ⅜ in.
Launcher: 3.5in.x 1 ⅛ in. x 1.5in.
Acorn (top & bottom glued together): 1in. X ⅞ in.
Have fun printing:)
This is a re-upload of the model made by 3DPmom➡ https://www.printables.com/model/652976-acornhole . I have the creator's consent to use the photos and description.
License
❌ Sharing without ATTRIBUTION
❌ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—No Derivatives
https://creativecommons.org/licenses/by-nc-nd/4.0/
Details parameters
<p>Layer Height 0.2mm</p><p>15-20% infill</p><p>PLA works great </p><p>No supports needed but you may need a brim on the tree trunk and acorn launcher (I used a brim for both).</p><p> </p><p>Some assembly required: you will need to superglue the acorn tops to the acorn bottoms. (Print several acorns for launching). Print two of the tree stands. When they're done printing connect them to the tree trunk to make it stand</p><p>. </p><p>Dimensions:</p><p>Tree trunk: 8.25in. x 5.75in. x ⅜ in.</p><p>Tree Stand: 2.5in. x 1in. x ⅜ in.</p><p>Launcher: 3.5in.x 1 ⅛ in. x 1.5in.</p><p>Acorn (top & bottom glued together): 1in. X ⅞ in.</p><p> </p><p>Have fun printing:)</p><p>This is a re-upload of the model made by <a href="https://www.printables.com/@3dpmom"><strong>3DPmom</strong></a><strong> </strong>➡ <a href="https://www.printables.com/model/652976-acornhole">https://www.printables.com/model/652976-acornhole</a> . I have the creator's consent to use the photos and description.</p>
Other information
Created on | May 6, 2024, 1:47 p.m. |
---|---|
Last edition | May 13, 2024, 3:49 p.m. |
Added by | @Marc3DP |
Category | Seasonal |
License dates | Yes |
Product status | Active |
Downloads | 3 |
---|---|
Rating | 0.0 |
Number of likes | 0 |
Customer reviews
0.0 out of 50 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!