Details parameters

<p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>0.16 mm</p><p><strong>Infill: 1</strong>0%</p><p>&nbsp;</p><p><strong>Notes:</strong></p><p>Depending on your printer and slicer, the fit of the "jaw" or "jaw+tongue" with the head may be too loose or too tight. You can print them a bit smaller or larger with no problems (recommended from 95% to 105%, but can be even more).</p><p><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);">Post-Printing =============</span></p><p><strong>Eyes</strong></p><p>After printing, push the eyes until you hear a "click" or "pop" sound. That means now they are free to rotate. It may be hard to move the eyes at the beginning, but they become more free with the use.</p><p><strong>Jaw / Jaw+Tongue</strong></p><p>Depending on your printer and slicer, the fit with the head may be too loose or too tight. You can print them a bit smaller or larger as indicated above, or:</p><ul><li>If the tab is too tight, sand it a little bit.</li><li>If the tab is too loose, you can "heat and squeeze" it to achieve a better fit. A hairdryer or even a lighter may do the job, and then press lightly with some pliers.</li></ul>