Smart One Handed Bottle Opener
54
2
54
2
Marc3DP
@Marc3DPDesigns: | 370 |
Downloads: | 27061 |
Followers: | 0 |
About me: | My name is Martin, better known as Marc3DP. I'm a huge 3d printing enthusiast and a co-creator of 3D PrintShelf . I have also a Youtube channel about 3D printing models https://www.youtube.com/c/Marc3DP |
Product description
Smart One Handed Bottle Opener by Kart5a
Summary
THIS IS NOT INVENTED BY ME. THIS IS INVENTED BY MARK MANGER. I HIGHLY RECOMMEND TO VISIT GROPENER WEBSITE: " https://www.gropener.com/ ". THERE YOU CAN BUY THE ORIGINAL BOTTLE OPENER MADE IN ALUMINUM. <<<
GrOpener is the creation of Mark Manger, an Applied Artist from Denver, Colorado. Inspired by the stick & screw openers Mark encountered in Africa in the 1990′s, the GrOpener uses the same leverage principle, but in a form that allows a bottle to be opened through the act of grabbing it. <<<
This is super easy to print!
Project video in Finnish (UPDATE: SUBTITLES IN ENGLISH): https://www.youtube.com/watch?v=gM_iu6JYxDA
PRINT WITH SUPPORT MATERIAL (there is a little overhang!)
My first ever 3D creation!
Version 4 (updated 23.6.14):
Now there is 4 different editions:
- Edition one: Basic OHBO
- Edition two: OHBO with a magnet.
- Edition three: OHBO with a coin.
- Edition four: OHBO with a magnet and a coin.
BTW: The back of the OHBO is for cans! Just stick the tail under the clip of the can to open it!
Magnets from dx.com (here is a link: http://www.dx.com/p/10050078w-round-ndfeb-magnets-silver-50-pcs-239991)
Coin is a 1cent euro coin.
You will also need some super glue if you are printing edition 2,3 or 4.
My prints are made of PLA, PLA/PHA and XT plastics! I like to see your prints of this model!
visit: https://www.youmagine.com/designs/smart-one-handed-bottle-opener-by-kart5a
Printing settings
All editions are right scaled and tested. At the slicing software rotation of the object is only required. I recommend to print with 100% infill (layer height 0.2mm) but my 20% infill opener is also tough enough to open a bottle!
Print always with support touching build plate! (There is a little overhang). I prefer to print this model with 100% infill. Also adding more outer perimeters helps. 4 Should do it.
Material:
For me this model works well with many of the plastics. I have tried PLA, Colorfabb PLA/PHA and Colorfabb XT (copolyester). ABS should work well as well but it might be a little too flexible (a part of the opening force goes to flexing so the opening process requires more force). I think PLA is awesome material to choose for this print!
Steps:
- Glue the coin and the magnet or either. (Edition 2,3 and 4)
- Add a keychain or some string to the hole.
!!! IMPORTANT !!!
Use super glue or epoxy and glue the coin as well as possible. The product has to be very solid. It won't break unless it is not solid enough. (I have printed so many of these and only one broke up caused by bad gluing.
Note! This model is made by Kart5a➡ https://www.thingiverse.com/thing:269463 . I added it here to collect all free models I show on my Youtube channel in one place ⮕ https://www.youtube.com/c/Marc3DP
License
❌ Sharing without ATTRIBUTION
✔️ Remix Culture allowed
✔️ Commercial Use
✔️ Free Cultural Works
✔️Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution-ShareAlike
https://creativecommons.org/licenses/by-sa/4.0/
All files (4)
Details parameters
<p>All editions are right scaled and tested. At the slicing software rotation of the object is only required. I recommend to print with 100% infill (layer height 0.2mm) but my 20% infill opener is also tough enough to open a bottle!</p><p>Print always with support touching build plate! (There is a little overhang). I prefer to print this model with 100% infill. Also adding more outer perimeters helps. 4 Should do it.</p><p>Material:<br>For me this model works well with many of the plastics. I have tried PLA, Colorfabb PLA/PHA and Colorfabb XT (copolyester). ABS should work well as well but it might be a little too flexible (a part of the opening force goes to flexing so the opening process requires more force). I think PLA is awesome material to choose for this print!</p><p>Steps:</p><ol><li>Print</li><li>Glue the coin and the magnet or either. (Edition 2,3 and 4)</li><li>Add a keychain or some string to the hole.</li></ol><p>!!! IMPORTANT !!!<br>Use super glue or epoxy and glue the coin as well as possible. The product has to be very solid. It won't break unless it is not solid enough. (I have printed so many of these and only one broke up caused by bad gluing.</p><p> </p><p><span style="background-color:rgb(255,255,255);color:rgb(0,0,0);"><strong>Note! </strong>This model is made by </span><a href="https://www.thingiverse.com/Kart5a"><span style="color:hsl(0,0%,0%);"><strong>Kart5a</strong></span></a><span style="color:hsl(0,0%,0%);"><strong> </strong></span><span style="background-color:rgb(255,255,255);color:rgb(0,0,0);">➡ </span><a href="https://www.thingiverse.com/thing:269463"><span style="background-color:rgb(255,255,255);color:rgb(0,0,0);">https://www.thingiverse.com/thing:269463</span></a><span style="background-color:rgb(255,255,255);color:rgb(0,0,0);"> . I added it here to collect all free models I show on my Youtube channel in one place ⮕ </span><a href="https://www.youtube.com/c/Marc3DP"><span style="color:rgb(77,153,230);">https://www.youtube.com/c/Marc3DP</span></a></p>
Other information
Created on | April 6, 2024, 8:39 a.m. |
---|---|
Last edition | May 16, 2024, 11:52 p.m. |
Added by | @Marc3DP |
Category | Household |
License dates | Yes |
Product status | Active |
Downloads | 54 |
---|---|
Rating | 0.0 |
Number of likes | 2 |
Customer reviews
0.0 out of 52 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!