Product description
Introducing the Mega Spiral Fidget – A Twist on Fun! 🌀✨
.gif)
Get ready for a fidget experience like no other!
This mesmerizing spiral design is built for satisfying bounces and endless play.
Whether you push from the center or press it down, the spiral flexes and springs back, making it the perfect interactive fidget for stress relief and fun.
📏 Available Sizes:
70mm – A compact, pen-like version for quick fidgeting on the go.
140mm – A larger, more dynamic spiral for an even more satisfying bounce!
🔄 Two Ways to Play:
Pan Base: Lay it flat and press down for a springy, bouncing motion.
Stand Mode: Set it upright and watch it flex and twist in a unique way!
💡 Whether you're looking for a fun desk toy, a stress-reliever, or a cool 3D-printed conversation starter, the Mega Spiral Fidget is sure to impress.
👉 Print it now and let the spiral fun begin! 😎🎉
Printing settings
Printed with PLA.
Layer height: 0.18mm.
Infill: 10%
Nozzle size: 0.4mm
Speed: 60mm/s.
Those settings are recommended to have the spring at the exact height so it does not hit the stand at the bottom:
Wall count / Shells / Perimeters: x >= 3
Infill: x >= 10%
NOTE:
- Haven't tried printing with a smaller / bigger nozzle, the design works perfect with a 0.4mm nozzle
- The model has only been tested with the FDM/FFF printing method, and the results were successful. It has not been tested with other printing methods.
License
PERSONAL USE ONLY. You are authorized to:
✔️Print and use the 3D prints of the 3D model for private use, in unlimited quantity;
✔️Share the images of your 3D prints of the 3D model on communication media such as social networks or websites.
What is not allowed:
❌No commercial use or public sharing of the 3D model;
❌No modification or adaptation of the 3D model for public sharing or sale;
❌No distribution, sale, donation or exchange of the digital files of the 3D model.
All files (5)
Log in to download files.
Details parameters
<p>Printed with PLA.<br>Layer height: 0.18mm.<br>Infill: 10%<br>Nozzle size: 0.4mm<br>Speed: 60mm/s.<br><br>Those settings are recommended to have the spring at the exact height so it does not hit the stand at the bottom:<br>Wall count / Shells / Perimeters: x >= 3<br>Infill: x >= 10%</p><p>NOTE:<br>- Haven't tried printing with a smaller / bigger nozzle, the design works perfect with a 0.4mm nozzle<br>- The model has only been tested with the FDM/FFF printing method, and the results were successful. It has not been tested with other printing methods.</p>
Other information
| Created on | Feb. 17, 2025, 10:02 a.m. |
|---|---|
| Last edition | April 21, 2025, 7:13 a.m. |
| Added by | @NirNova98 |
| Category | Toys & Games |
| License dates | Yes |
| Product status | Active |
| Downloads | 8 |
|---|---|
| Rating | 0.0 |
| Number of likes | 3 |
Customer reviews
0.0 out of 53 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!
