Construction Crane
(0.0 from 0 reviews)
24
4
0
24
4
3D-printed crane, all in one piece and without supports. This model is quite complex, but easy to use thanks to its two lateral levers that give it full mobility. It's a skill game for all ages and very entertaining.
This model also features a hole in the back that will allow you to screw it onto a base, to limit movement if desired.
And the best part? You don't need any engineering knowledge to use it! All you need to do is move the left lever and lock it with the clip that also acts as a brake, and move the left leg to the side.
In addition, we have designed two more files, so you can practice your skills.
Printing it is easy. It's a medium-high difficulty print, but don't worry, we have designed the tolerances to make it easy to print at home. We recommend using normal PLA filament for a better printing experience.
It is a medium-high difficulty print. The minimum tolerances for this model are 0.35mm, in the base of the parts the tolerances are greater to facilitate printing, however, it is essential to have the first layer of printing well configured and the retractions well configured so that the parts rotate correctly. There are also 16mm bridges. Normal PLA filament is used, I do not recommend using matte filament as it causes the movements to not be as fluid.
General printing settings:
PERSONAL USE ONLY. You are authorized to:
✔️Print and use the 3D prints of the 3D model for private use, in unlimited quantity;
✔️Share the images of your 3D prints of the 3D model on communication media such as social networks or websites.
What is not allowed:
❌No commercial use or public sharing of the 3D model;
❌No modification or adaptation of the 3D model for public sharing or sale;
❌No distribution, sale, donation or exchange of the digital files of the 3D model.
<p>It is a medium-high difficulty print. The minimum tolerances for this model are 0.35mm, in the base of the parts the tolerances are greater to facilitate printing, however, it is essential to have the first layer of printing well configured and the retractions well configured so that the parts rotate correctly. There are also 16mm bridges. Normal PLA filament is used, I do not recommend using matte filament as it causes the movements to not be as fluid.</p><p>General printing settings:</p><ul><li>No supports</li><li>Layer height: 0.2mm</li><li>Infill density : 15%</li><li>Wall Line count : 3</li><li>Top and Bottom layers: 3</li></ul>
Created on | Nov. 14, 2024, 4:19 p.m. |
---|---|
Last edition | Nov. 21, 2024, 7:27 a.m. |
Added by | @MaDiStudios |
Category | Toys & Games |
License dates | Yes |
Product status | Active |
Downloads | 24 |
---|---|
Rating | 0.0 |
Number of likes | 4 |
Share your thoughts with other customers.
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!
The model is available exclusively as a paid version. Make a payment to download this model.