Flexi Holding Cat (Print-in-place)
418
13
Product description
This model was inspired by the way a cat's torso lengthens when it is carried in the arms. There are two types of models: a standard length and a long type, which is the same as when the cat is stretched out in the arms.
Choose whichever you like and hug the cat!
Print in Place with no supports. No assembly required. Please take pictures of your Flexi and share them with us!
💰Commercial Use💰
This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults or Etsy.
⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.
Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.
Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.
Printing settings
Rafts: No
Supports: No
Build Plate Adhesion Type: Skirt or None
Layer Height: 0.1-0.3mm
Infill:15-20%
Filament material: PLA
{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Right
Z Seam Corner Preference: Hide Seam
{Recommend: Bambu Lab Printer}
Layer Height: 0.2mm
Seam Position: Aligned
Wall Loops: 3
First layer: 30mm/s
Outer wall: 30mm/s
Prime Tower Width: 10mm
Prime Volume: 10mm^3
Prime Tower Brim Width: 0mm
Tags
License
❌ Sharing without ATTRIBUTION
❌ Remix Culture allowed
❌ Commercial Use
❌ Free Cultural Works
❌ Meets Open Definition
This work is licensed under a Creative Commons (4.0 International License) Attribution—Noncommercial—No Derivatives
https://creativecommons.org/licenses/by-nc-nd/4.0/
All files (6)
Details parameters
<p>Rafts: No<br>Supports: No<br>Build Plate Adhesion Type: Skirt or None<br>Layer Height: 0.1-0.3mm<br>Infill:15-20%<br>Filament material: PLA</p><p>{Recommend}<br>Layer Height: 0.2mm<br>Print Speed: 60mm/s<br>Outer Wall Speed: 10mm/s<br>Z Seam Alignment: User Specified<br>Z Seam Position: Right<br>Z Seam Corner Preference: Hide Seam</p><p>{Recommend: Bambu Lab Printer}<br>Layer Height: 0.2mm<br>Seam Position: Aligned<br>Wall Loops: 3<br>First layer: 30mm/s<br>Outer wall: 30mm/s<br>Prime Tower Width: 10mm<br>Prime Volume: 10mm^3<br>Prime Tower Brim Width: 0mm</p>
Other information
Created on | Aug. 15, 2024, 12:48 p.m. |
---|---|
Last edition | Nov. 8, 2024, 2 a.m. |
Added by | @3D_FlexSeeds |
Category | Art |
License dates | Yes |
Product status | Active |
Downloads | 418 |
---|---|
Rating | 0.0 |
Number of likes | 13 |
Customer reviews
0.0 out of 513 global ratingsReview this product
Share your thoughts with other customers.
Reviews (0)
No one has added a comment yet
No one has commented on this product yet. If you downloaded this product or like what you see, please rate it. Comments are very useful for other users. Build a community with our website today!